$56.00 - $70.00
List: $70.00 |Save: $14.00

ESS Innerzone 2 NFPA Goggle System

$56.00 - $70.00
SKU: ESS01GY2-WF//Out of Stock

Details

Innerzone 2 NFPA Goggle System fits all brands of Modern & Traditional Style Helmets!

The Innerzone Series of NFPA-compliant firefighting goggles is used by the world's most elite firefighting teams. This series is designed to withstand the rigors of structural firefighting, while offering the highest levels of protection and safey available. Certified by independent test labs to meet or exceed all the standards associated with NFPA 1971-2000, including the 500°F 5-minute oven test. 

Features:
  • All goggle components are extremely heat resistant
  • 2-piece Nomex® strap & Snap-on/Snap-off™ mounting system
  • Advanced ESS ClearZone™ FlowCoat lenses eliminate fog inside & prevent scratches outside
  • Full-perimeter ventilation & filtration system minimizes lens fogging & filters smoke & airborne particles
  • Patented Speed-Clip™ system facilitates quick strap adjustment
  • Interchangeable 2.6 mm high-impact Polycarbonate lenses
  • Distortion-free optics & 100% UVA/UVB protection
  • Roomy frame fits over most prescription eyewear

The NFPA-compliant Innerzone 2™ features a two-piece strap system with Snap-on/Snap-off™ helmet mounting brackets. Each strap contains a circular grommet that snaps on and off the two mounting brackets, which attach to a helmet brim with no drilling required.

This patented system allows the goggles to be stowed in a pocket and quickly deployed, or they can remain attached to the brackets and kept on either the front or back of the helmet. In either case, this system works extremely well in conjunction with face shields or Bourke flip-downs.

Firefighters can use the Innerzone 2™ alone or together with flip-downs or a face shield. The patented ESS Speed-Clip™ strap system makes adjusting the Innerzone™ straps quick and easy, even with gloves on.
 
The full-perimeter ventilation and filtration system minimizes lens fogging and filters airborne particles, dust, and debris.

The roomy Striker™ frame is designed to fit over most eyeglasses.

Thick, 2.6 mm polycarbonate lenses offer maximum impact protection and optical clarity. These lenses feature ESS' advanced ClearZone™ FlowCoat lens treatments, which provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside.

All Innerzone™ goggles are compliant with the NFPA 1971-2013 structural fire equipment performance requirements, including the 500°F for 5-minute oven test. They are also U.S. Federal OSHA compliant, exceed the requirements of ANSI Z87.1-2010, and are considered Primary Eye Protection by NFPA 1500. All Innerzone™ lenses provide 100% UVA/UVB Protection.

Click here for Specifications

California Residents: Prop 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
 

Ratings & Reviews

No reviews available

Be the first to Write a Review

Q&A's:

"Will this fit on my cairns 1010 traditional helmet"

Hi Robbie, yes they will fit the Cairns/MSA 1010 helmet

"does the mounting bracket require drilling holes into my helmet?"

No they do not, they use 2 set screws per side to attach the mounting brackets to the brim of your helmet.

"Will this work on my Bullard PX helmet instead of the visor?"

this should work well with your helmet

"Will these fit over eyeglasses?"

Andy you should be able to

"Can these goggles be used for extrications as well or are the suited for structural only?"

Hi Reese, yes you can use this for extrication/rescue calls, if you look at our web site 1 of the pictures we have on there shows a FF with an extrication tool in his hands.

"Will it fit on my MSA heltmet without the rubber around the rim? Do you need the edge rubber?"

Chris if you are talking about the rubber bead that's on the edge of the helmet brim we don't think you need that to make the goggles fit the helmet